Full-service roof repair, replacement and installation across Oakland — Class A fire-rated assemblies for the hills, solar detach-and-reset in the flats, and the City of Oakland permit handled for you.
Oakland asks more of a roof than most Bay Area cities. The hills sit in a designated very high fire hazard severity zone, so the roof assembly is a fire-safety component before it is anything else. Down in the flats, bungalows and Craftsman homes carry decades of layered roofing over original board decking, and solar arrays are now common on both.
We handle the whole job: tear-off, decking and dry rot repair, underlayment, the finished roof, and the solar detach-and-reset when there are panels in the way. The City of Oakland permit is ours to pull and see through final inspection.
Recently completed in Oakland: a full shingle reroof on Colby Street with the existing solar array detached and reset — down to the deck and back up in about three weeks.
Residential and commercial roofing across Oakland and the East Bay.
Full tear-off, decking repair and a new roof system — with the solar detached and reset where needed.
Learn more →Leak tracing, flashing and slipped or cracked material fixed before it reaches the decking.
Learn more →A written condition report on decking, underlayment, flashing and ventilation — not just the surface.
Learn more →Fire-rated assemblies specified and documented for Oakland Hills properties.
Learn more →Panels removed, the roof replaced underneath, and the array reset and reconnected.
Learn more →Same-day tarping to stop water entry while the permanent repair is scheduled.
Learn more →Seamless gutters and downspouts sized to move water away from the foundation.
Learn more →Skylight replacement with the manufacturer flashing kit fitted during the re-roof.
Learn more →Licence you can check C-39 #1090028, verifiable on the CSLB website before you sign anything.
Dry rot priced before tear-off Decking and dry rot appear as line items in the written scope, not as a surprise once the roof is open.
We pull the permit The City of Oakland permit is ours to obtain and carry through final inspection.
Fire-zone literate Class A assemblies specified in writing for hillside properties, with the product documentation to match.
Solar handled in-house No coordinating between your roofer and a separate solar contractor.
16+ years, 1,000+ roofs A+ BBB rated, working across the Bay Area since 2010.
If your property sits in a very high fire hazard severity zone, the roof covering is a fire-safety assembly, not just weatherproofing. Much of the Oakland and Montclair hills falls into that category, and the roof is the surface most exposed to wind-driven embers.
What matters is the tested assembly — covering, underlayment and deck together — not the shingle alone. We specify the rated assembly in the written scope and hand over the product documentation so it is on record for your insurer.
Class A assembly specified in writing before the job starts, not decided on the roof.
Ember-resistant detailing at eaves, valleys and vents, where embers actually get in.
Documentation for your insurer — several carriers now ask for it before renewing in hillside ZIPs.
It usually surfaces at resale, when the buyer's agent pulls the permit history and finds nothing. It can also complicate an insurance claim. The fix is generally a permitted re-roof now, documented properly.
Minor repairs typically do not, but a full re-roof or structural decking work does. If you are unsure, we check with the City of Oakland before quoting rather than guessing.
Oakland is not one roofing market. Housing stock and fire exposure vary sharply from the hills to the flats.
Steep lots, heavy tree cover and very high fire hazard designation. A Class A rated assembly and ember-resistant eave and vent detailing matter more here than anywhere else in the city.
Early-1900s homes, often with multiple layers of roofing over original board decking. Tear-off frequently reveals decking that needs replacing before anything new goes down.
A mix of single-family homes and small apartment buildings, many with low-slope sections at the rear that need a single-ply or torch-down system rather than shingle.
Simpler rooflines and a high concentration of solar retrofits, which means detach-and-reset is part of most replacement quotes here.
A failing shingle roof under an existing solar array, replaced from the deck up — with the panels detached, the roof rebuilt beneath them, and the array reset and reconnected in about three weeks.
It is the clearest example of the two things Oakland roofs most often need at once: a genuine tear-off rather than another layer, and a solar array handled by the same crew doing the roof.
Oakland is our East Bay base. We also cover the surrounding Alameda and Contra Costa communities.
Verified Google reviews from our Business Profile — 4.8 stars across 161 reviews.
"The roof over our garage had aged much faster than the rest of the house because it gets direct afternoon sun. We ended up replacing that section along with the main roof, and everything blends together perfectly."
"We received the dreaded 'Your homeowners insurance is not going to be renewed' letter… They had the best warranty BY FAR and they handled the permitting process entirely. I knew there was some wood rot that needed repair so had budgeted more than quoted just in case the price went over. Nope. The final price was the exact price quoted."
"Ray and team did an excellent job removing my 20+ year old roof and installing the new roof. They were efficient and kept my property clean during the process. Highly recommend!"
Oakland pricing tracks the wider Bay Area, where labour, permit fees and Title 24 requirements push costs above national averages. The variables that move a quote most are roof pitch, how many existing layers come off, decking condition and whether solar has to be detached. We price dry rot and decking as line items up front. Our Bay Area cost guide walks through the numbers.
If your property is in a very high fire hazard severity zone — which covers much of the Oakland and Montclair hills — the roof assembly needs to meet the fire-rating requirement, and increasingly your insurer will want documentation of it. We specify the rated assembly in writing.
Yes. We detach the array, replace the roof underneath, then reset and reconnect it. Doing both with one crew avoids the scheduling gap and the finger-pointing that comes from splitting the work. The Colby Street project is exactly that job.
Yes. We obtain the City of Oakland permit and carry it through final inspection so the work is on record.
Most single-family re-roofs run one to two weeks. Add a solar detach-and-reset, or significant decking replacement, and it stretches — the Colby Street job took about three weeks start to finish.
Yes. If the underlayment and decking are sound and the damage is localised, a repair is the right call. We inspect the attic and the decking, not just the surface, before recommending a full replacement.
A written scope with dry rot and decking priced up front, the permit handled, and a Class A assembly specified if you are in the hills. No obligation.
